Have you ever looked at your Harley-Davidson in the rearview mirror and wished the turn signals looked as bold as the rest of your bike? Those dim, stock factory bulbs often struggle to cut through the glare of midday traffic, leaving you feeling less visible and less secure on the open road. Upgrading to LED turn signals is one of the most effective ways to sharpen your bike’s profile while drastically boosting your safety.
However, the aftermarket world is flooded with choices. You might feel overwhelmed by technical jargon like “load equalizers,” “can-bus compatibility,” and “plug-and-play” wiring. Picking the wrong set can lead to annoying rapid-flashing issues or, worse, electrical errors that force you back to the drawing board. It is easy to feel frustrated when you just want a simple, clean look for your ride.
In this guide, we take the guesswork out of your upgrade. We will break down exactly what you need to look for to ensure a perfect fit for your specific model year. You will learn how to spot high-quality components that last through heavy vibration and harsh weather. By the end of this post, you will have the confidence to pick the perfect lights that make your Harley stand out from the crowd. Let’s dive into the best ways to brighten your ride and hit the road with total peace of mind.
Top Led Turn Signals For Harley Davidson Recommendations
- 【WIDE COMPATIBILITY】Benlari 2-inch LED turn signals are designed to fit for Harley-Davidson Dyna, Softail, Sportster, and Touring models (Road Glide, Road King, Street Glide, Electra Glide) from 1986 to 2024, matching standard 2-inch bullet-style turn signals
- 【500% SUPER BRIGHTER】Benlari 1157 LED turn signals feature 81 ultra-bright SMD LEDs, delivering 500% brighter illumination than halogen bulbs and 32-LED alternatives, enhancing safety in all conditions
- 【60,000+ HOURS LIFESPAN】Built with advanced circuit protection, these turn signals offer low power consumption, efficient cooling, and a 60,000+ hour lifespan
- 【4 HIGHLY TRANSPARENT LENS】The smoked lens covers are made from IP67 waterproof PC material, protecting against dust and water while maintaining crystal-clear light output
- 【SUPER QUICK INSTALLATION】The wireless all-in-one running brake turn signal light fit for Harley features Plug-and-play setup, offers a hassle-free install in just 3 minutes (some models may need a load resistor)
- COMPATIBILITY - 3 1/4 Inch led turn signals flat style with1157 1156 compatible for →For Electra Glide: FLHTK 2010-2013, FLHTCU 2017-2019, FLHT 2001-2009, EFI FLHTI 2003-2006, FLHFB 2023, FLHTC 2001-2013, EFI FLHTCI 2001-2006, FLHFB 2023. →→For Road Glide: FLTR 2001-2002, EFI FLTRI 2001-2003. →Road King: FLHR 2001-2022, EFI FLHRI 2001-2006, EFI FLHRCI 2001-2006, FLHRC 2007-2013. →For Ultra Limited: FLHTKL 2017-2019, FLHTK 2017-2023.
- COMPATIBILITY - Upgraded led chips and high indensity design 81smd chips make high brighter for safe riding no matter in day or at night, They are compatible→For Tour Glide: FLT 1986-1996, FLTC 1986-1991, FLTCU 1989-1993, FLTCI 1986-1996. →For Heritage Softail Classic: FLSTC 1999-2017, FLHRC 2007-2013. →For Trike: FLHXXX 2010-2011 (Excluding FLHTCUTG, FLRT). →For Ultra Classic Electra Glide: FLHTCU 2007-2013, EFI FLHTCUI 2001-2006
- PLUG N PLAY SOCKET - Compatible for 3 1/4 inch led turn signals 1157/1156 front rear kit set add more highlight for your bike. New integrated handle design. **Some orlder fit for Harley models, may require a load equalizer listed →2010-earlier Softails;→2011-earlier Dynas;→2013-earlier Sporsters;→2013-earlier Touring and Tri-Glide models.
- HIGH BRIGHTNESS - Built in 81 PCS SMD LED light, lower power consumption, long lifespan up to 50,000h, 200% brighter than halogen bulbs with wider range illumination makes you were more easier noticed while riding. Clear back protection, anti-scratch and waterproof.
- SWITCHBACK MODE - Higher indensity design, Brake & Turn Signal & Tail Light Combo Light Kit. The front bulbs are halo effect turn signal, outer halo white for running light and center amber for turn signal. The rear integrated tail light with brake light and runninglight, full red for brake light, outer halo red for running light. It can light up the road makes you to be more noticeable when you ride in dark.
- 【Compatibility】These bullet led turn signal light fit all motorcycles with 2 inch bullet led turn signal light, especially fit for 2011-2013 Harley Blackline, 2013-2017 Harley Breakout, 2009-2017 Harley Dyna, 2012-2017 Harley Forty Eight, 2009-2017 Harley Iron 883, 2012-2017 Harley Night Rod Special, 2010-2017 Harley Road Glide, 2017 Harley Road King, 2016-2017 Harley Roadster, 2012-2016 Harley Seventy Two, 2010-2017 Harley Softail, 2008-2012 Harley Sportster 1200, 2010-2017 Harley Street Glide.
- 【1157 Front LED Turn Signal Light】Still worried about unsafe riding at night? The light board is composed of 48 pcs led bulbs, 2x brighter than halogen bulbs for lighting output, increasing your visibility while riding at night or rainy days, greatly improve your driving safety. Switchback mode, outer white ring for running/parking light and center amber for front turn signal. Amber-Out-Amber-Out blinking. White halo ring is out while blinker is on
- 【1157 Rear LED Turn Signal Light】Still worried about unsafe riding at night? The light board is composed of 48 pcs led bulbs, 2x brighter than halogen bulbs for lighting output, increasing your visibility while riding at night or rainy days, greatly improve your driving safety. Switchback mode, Outer red ring for running light, all bulbs light up and flashing for turn signal, all bulbs light up for brake light
- 【Easy to Install】NOTE: Please don’t pull the lights and wires too hard, otherwise the turn signal will easily break. When you insert the turn signal, then gently twist the wire clockwise. Plug and play, equipped with handle design, only 2-3 minutes are required to install. 1157 double contacts, no wiring needed. Just take off your stock bulb, and then push everything back to it's original place
- 【Buy with Confidence】Come with 2Pcs 1157 Front turn signal light + 2Pcs 1157 rear turn signal light +4pcs smoked lens cover +4pcs load resistors. You are backed by 3-Month warranty since order purchase date. Please feel free to contact us if you have any questions, solutions will be offered once detail is confirmed.
- 【Super Bright LED Turn Signals--60 LARGER 3030 SMD LEDs】The 1157 LED turn signals are more than 300% brighter than halogen bulb, full auminum housing with upgraded smoke lens for better light output and better heat distribution for longer lifespan and safter driving.
- 【Smoke Lenses--Upgrade Versions】 Excellent Light Transmission.There are turn signal lenses made of high-quality PC plastic with 3-layers special protective coating for scratch-resistant after 300 wipes.The regular lenses will be scratches after 10 wipes and make the motorcycle look bad.
- 【Light Performance】Can see them well during daylight.Switchback design lighting.The front blinker available in two color, white ring for running light, amber for turn signals.Rear turn lights are red colors and the outer ring is running light ,full light is brake light.The turn signals allows you to be more noticeable.it have a long life and fit the motorcycle system perfectly.
- 【Light Installation--Handle design,Plug-and-play】The LED turn signals are plug-and-play on models with front and rear bullet style housings.
- 【Compatibility 1】The turn signals fits for Harley with 2" bullet style models. ➵For Touring : Street Glide,Street Glide Special ,Road Glide ,Road Glide Special,Road King Special(Excluding CVO/Limited/Classic/Ultra) .➵For Sportster :Iron883, iron 1200, SuperLow 72 48,883R 1200T,1200 Low ect.
The Ultimate Guide to LED Turn Signals for Your Harley-Davidson
Upgrading your Harley-Davidson with LED turn signals is one of the smartest moves you can make. LEDs are brighter, last longer, and make you more visible on the road. This guide helps you pick the right set for your ride.
Key Features to Look For
- Brightness: Look for high-lumen output. Brighter lights help drivers see you during the day.
- Plug-and-Play Compatibility: Choose kits that fit your specific Harley model without needing extra wires.
- Can-Bus Compatibility: Modern Harleys have complex electrical systems. Ensure the lights won’t cause “hyper-flashing” or error codes.
- Running Light Function: Many LED kits allow your turn signals to stay on as dim running lights, adding extra visibility.
Important Materials
Durability matters when you ride a motorcycle. Look for housings made from CNC-machined aluminum. These are strong and look great with your bike’s finish. The lenses should be made of impact-resistant polycarbonate. This material resists cracking from road debris and UV rays.
Factors That Improve or Reduce Quality
High-quality LEDs use thermal management systems. These systems pull heat away from the light chip so it doesn’t burn out. Low-quality options often use cheap plastic housings that leak water. Moisture inside the lens will ruin the electronics quickly. Always look for an IP67 rating, which means the lights are dust-tight and waterproof.
User Experience and Use Cases
Installing LED signals changes your riding experience. In city traffic, the sharp, instant “on-off” flash of an LED grabs attention faster than a dull bulb. If you ride at night, the extra glow helps you see the road edges better. Most riders appreciate the modern look it gives their bike, taking years off the appearance of an older model.
10 Frequently Asked Questions
Q: Do I need a load equalizer for my Harley?
A: Many older Harley models need a load equalizer to prevent rapid flashing. Newer models often have settings you can adjust through the bike’s computer.
Q: Are these lights hard to install?
A: Most kits are very simple. If you have basic tools, you can finish the job in under 30 minutes.
Q: Will these lights void my warranty?
A: Generally, no. However, check with your local dealer if you have concerns about your specific warranty terms.
Q: Can I use smoked lenses with LEDs?
A: Yes. Smoked lenses look great, but make sure your LEDs are bright enough to shine through the darker plastic.
Q: Do LEDs use less power than standard bulbs?
A: Yes, LEDs draw much less power, which puts less strain on your motorcycle’s battery and charging system.
Q: How long do LED signals last?
A: A high-quality LED can last over 30,000 hours. You will likely never need to replace them again.
Q: What is “hyper-flashing”?
A: This happens when your turn signal blinks much faster than normal. It usually means the system doesn’t detect enough resistance from the bulb.
Q: Are these lights legal?
A: Most LED turn signals meet DOT (Department of Transportation) standards. Check your local state laws to be certain.
Q: Should I choose amber or red LEDs?
A: Use amber for the front and red or amber for the rear, depending on your local traffic laws and lens color.
Q: Can I switch back to standard bulbs later?
A: Yes, you can always switch back. However, once you see the brightness of LEDs, you will likely never want to go back.